FU chain conveyor Product Overview: 
 FU chain conveyor, is the introduction of foreign advanced technology and ingenuity to improve the design level of a manufactured (or tilt ≤ 15 °) conveying powder, granular materials, machinery, new product, its use performance better than the screw conveyor, en masse conveyor and other transportation equipment, widely used in building materials, construction, chemical, mining, machinery, metallurgy, food feeding and processing industry, is an ideal new transportation equipment. 
 FU chain conveyor model description: 



 FU chain conveyor working principle: 
 FU series of chain conveyor, the superiority lies in its working principle, the material has the characteristics of internal friction and lateral pressure, the movement of the conveyor chain within the increased friction between the internal pressure of the machine tank materials and particles, material layer between the internal friction is greater than the outer friction of the material slot wall, the material along with the conveyor chains like water to forward flow, the ratio of the powder bed height and width of the bays to meet certain conditions can form a stable material flow. Advanced transport theory, sophisticated design and manufacturing process of the products excellent performance provides a reliable guarantee. 
 FU chain conveyor main features: 
 Reasonable structure, novel design, advanced technology, complete series. 
 2 fully enclosed chassis, good sealing performance, operational safety and reliable operation. 
 Cost-saving, energy-saving and durable, less maintenance, reduce consumption and improve efficiency. 
 Transmission capacity, supplying a large number of materials allowed in a smaller space, transmission capacity of 6 ~ 600m3 / h. 
 5 flexible import and export, the elevated ground, pit, level, climbing (≤ 15 °) can be installed conveyor length can be designed according to the user. 
 6. Long life, conveyor chains using alloy steel processed by advanced means of heat treatment, the normal life of five years, the life of the roller chain ≥ 2 ~ 3 years. 
 FU chain conveyor equipment selection: 
 An equipment selection: 
 (1) chain speed 
 Chain speed, according to the state of the material choice for abrasive, high temperature, the proportion of coarse particles and the material particles of the material selected slow speed can refer to Table 2-2 to select the optimal chain of cement and raw material, and any other cement performance and status of similar material can refer to the choice. 
 (2) models 
 Selected models based on throughput. In the same throughput, the larger models enable the chain speed reduced and prolong life, but the throughput is lower than the transport volume of 30% or more occurs when the material layer is too thin, the formation of idling, increase wear and tear. 
 (3) Power 
 Throughput, transmission length and process conditions refer to Table 3-7 to select power. The drive assembly into the form of X1, X2, and about loaded, X2 is back mounted. 
 (4) expected out 
 Expected out of the mouth, the user needed to select. 
 (a) to prevent feed Chang, poor mobility, and humidity of the material should not be used to inspiring spout. 
 (b) from the tail shaft closer to the first feed inlet should not be used motivated the discharge port. 
 According to user needs, the machine can be set only into the discharge port, and also provided with a gate discharge port. 
 FU chain conveyor technical parameters table: 
 Model width 
 (Mm) ideal 
 Granularity 
 (Mm) 10% of the most 
 Large-grained 
 (Mm) Maximum 
 Transport 
 Gradient is most suitable for the material of the throughput (m3 / h), 
 Humidity 
 Chain wire speed (m / min.) 
 1012 13.5 15,162,025 
 FU150 150 <4 <8 ≤ 15 ° 6-9 

 9-13 
 12-18 15-23 ≤ 5% 
 FU200 200 <5 <10 11-14 

 16-22 
 22-2927-36 
 FU270 270 <7 <15 19-27 23-32 25-36 28-41 31-43 38-54 47-68 
 FU350 350 <9 <18 
 36-50 
 49-68 
 65-9063-113 
 FU410 410 <11 <21 
 50-72 
 63-90 
 86-11795-135 
 FU500 500 <13 <25 
 72-99 
 95-131 
 136-180144-203 
 FU600 600 <15 <30 
 104-144 
 135-190 
 180-260207-270 


 Note: The optimal throughput is the cement material calculated for other industries to transport cut small, temperature <60 ° C the material, the speed can be accelerated. Material moisture content of less than 5%, means the hands are wet, into a group, doing nothing can be scattered. 
 FU chain conveyor inclined conveyor when the discount factor η value Table: 
 Inclination from 0 to 2.5 2.5 5 5 7.5 7.5 10 10 12.5 12.5 15 
 of η 1 0.95 0.9 0.85 0.8 0.7 

 Note: When the conveyor is tilted, the throughput will be reduced, then the actual actual transmission capacity for the technical parameters of the value multiplied by the discount factor η value. 
 FU chain conveyor conveyor chain speed of cement raw and cooked raw materials and finished powder is best: 
 Powder material powder of raw material or finished cement clinker or cement finished raw materials or clinker meal back to the material 
 Humidity <60 ° C to 60 ~ 120 ℃ 60 ℃ 60 ~ 120 ℃ 
 The optimum chain speed (m / min) 15 ~ 20 10 ~ 13.5 10 ~ 12 10 
 Maximum chain speed (m / min) 25 15 13.5 12